Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Securing the Electric Fan with a Standard Wrench

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Key

The electric fan of the cooling system is secured to the shaft with a nut. To remove or install it, a specially shaped wrench is available, but you can also use a standard wrench. However, to fit it in the tight spaces between the engine and the fan, you need to make a notch in the plastic shroud of the fan. If it's your vehicle, decide for yourself whether to make this modification to the cover. If it's a customer's vehicle, discuss it with them before cutting.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Idler Pulley
Replace Idler Pulley
BMW Serie 5 (1995-2003 / E39) To replace the idler pulley of the auxiliary belt (the small plastic one located at the top, mounted directly on the alternator), you first need to r…
Radiator Replacement Instructions
Radiator Replacement Instructions
BMW Serie 5 (2003-2010 / E60, E61) Clogs or coolant leaks from the radiator are generally caused by rust formation in the system, which occurs especially if only water is used in the c…
Alternator Disassembly Instructions
Alternator Disassembly Instructions
BMW Serie 5 (1995-2003 / E39) To disassemble the alternator, first remove the auxiliary belt by loosening the tensioner. Next, to access the alternator mounting bolts, you need to…

How to Replace the Cabin Filter in a Peugeot 207

How do you replace the cabin filter (pollen filter) located in a Peugeot 207? Follow these steps to remove the filter from its dedicated housing: use a screwdriver to unscrew the screws of the plastic cover located under the front windscreen, then remove the filter cover using a lever (where the air filter is located). Use a screwdriver to remove the cap from the filter housing and extract the cabin filter. Insert a new filter ensuring it fits snugly around the walls of the box. Finally, reattach the filter box cap and tighten the screws. Close the engine bonnet after assembly.

Watch the video!


by ScegliAuto

More videos