Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Hood on a BMW Z3

Model: BMW Z3 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Convertible top

This video is currently unavailable

With the car roof down, remove the two small hydraulic covers on either side. Behind the seats, move the fabric and remove the cover caps.

With the car now covered, unscrew the numerous fastening screws of the hood (all are 10 mm screws, there should be 18 bolts). With the hood retracted, you will notice the screws that secure the upper protective plastic: unscrew them and remove the plastic.

At this point, if you have unscrewed all the screws securing the hood to the supporting structure, you can detach the hood from the structure, as shown in the video. Proceed in reverse to fit the new one.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Window of the Hood on a BMW Z3
How to Remove the Rear Window of the Hood on a BMW Z3
BMW Z3 (1995-2002 / MK 1) In this tutorial, you will learn how to remove and replace the plastic rear window of the hood on a BMW Z3 by following these simple steps. First, re…
How do you open the convertible top of the BMW Z4?
How do you open the convertible top of the BMW Z4?
BMW Z3 (1995-2002 / MK 1) In order to open the convertible top of the BMW Z4, you need to turn on the instrument panel by inserting the ignition key into the appropriate slot:…
Replacement of the rear window of the BMW Z3.
Replacement of the rear window of the BMW Z3.
BMW Z3 (1995-2002 / MK 1) Below we will see the main instructions that will allow us to disassemble and replace the rear window of the BMW Z3. First, let's move to the back of…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos