Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fixing Thermostat Housing Issues

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Thermostat

See other generations:
Video tutorial

Replacing the thermostat, a very important component in a vehicle, is usually within everyone's reach. However, sometimes issues can arise with its housing: while annoying, the problem is easily solvable.

In this guide, we will see how the housing can become a bit damaged, causing the thermostat gasket not to seal properly. To fix this issue, you will need a special adhesive for aluminum to apply along the edge of the housing.

Of course, there are many potential problems that can arise, but in this tutorial, we have addressed this specific case.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Tips for the Thermostat in Case of Engine Overheating
Tips for the Thermostat in Case of Engine Overheating
BMW Serie 5 (1995-2003 / E39) This video provides some tips regarding the proper functionality of the thermostat in a BMW 5 Series. The thermostat is the valve that opens and clos…
Trunk Handle Repair
Trunk Handle Repair
BMW Serie 5 (1995-2003 / E39) If you have difficulty opening the trunk, the repair is quite simple. You only need a screwdriver and a pair of needle-nose pliers. Remove the screw …
Automobile Thermostat Replacement
Automobile Thermostat Replacement
BMW Serie 5 (1995-2003 / E39) The thermostat is the device that manages the temperature of your automobile. To proceed with this operation, leave the car off for a few hours to av…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos