Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: BMW Z4 E86, E85 - Years 2002-2008
Part: Cabin air filter

This video explains how to replace the cabin air filter. First, unscrew the two screws located under the glove compartment on the passenger side and gently remove the panel, being careful of the wires attached to it. To facilitate the disassembly, also remove the circuit connected to the panel where the various wires go; once you locate the filter box, remove the cover and then slide out the filter towards you. After removing the old filter, clean its housing before installing the new filter.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the BMW Z4 E85.
How to replace the air filter of the BMW Z4 E85.
BMW Z4 (2002-2008 / E86, E85) To correctly replace the engine air filter in your BMW Z4 E85, simply follow these steps one by one. First, purchase a new air filter and ensure that…
How to change the cabin air filter on the BMW Z4
BMW Z4 (2002-2008 / E86, E85) Changing the cabin air filter on the BMW Z4 is not easy because it is located in a hard-to-reach place. But let's see how to do it; we need to go und…
How to replace the cabin filter in the BMW Z4?
How to replace the cabin filter in the BMW Z4?
BMW Z4 (2009-2016 / E89) In this tutorial, we can see how to replace the cabin filter in the BMW Z4, a very simple and quick operation. First of all, go to the passenger side…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos