Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the BMW Z4 2003

Model: BMW Z4 E85, E86 - Years 2002-2008
Part:

When the tire warning light on the instrument panel of your first-generation BMW Z4 (2003) continues to stay on despite there being no puncture, you need to proceed with manually resetting the warning light. Below we will discover together how to do it. First, reach the driver's seat and start the ignition if it is still off, then locate the buttons located at the bottom of the central dashboard and hold down the button with the tire icon on it. Finally, release the button as soon as the warning light disappears from the instrument panel.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Reset Service Light on BMW Z4
Reset Service Light on BMW Z4
BMW Z4 (2002-2008 / E85, E86) In this video, you will see how to reset the "service" light for routine maintenance on the BMW Z4. First, turn off the ignition and put the key in p…
How to reset the service light on the BMW Z4
How to reset the service light on the BMW Z4
BMW Z4 (2009-2016 / E89) The steps to reset the service light of the BMW Z4 are simple and quick to perform independently. The first step is to turn on the instrument panel w…
How to Program TPMS Sensors on a BMW Z4
How to Program TPMS Sensors on a BMW Z4
BMW Z4 (2009-2016 / E89) Today, you will learn how to program the tire pressure monitoring system (TPMS) sensors on a BMW Z4. The first step is to replace the sensors. Remove…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos