Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter on the BMW Z4

Model: BMW Z4 E85, E86 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Cabin air filter

See other generations:
This video is currently unavailable

Changing the cabin air filter on the BMW Z4 is not easy because it is located in a hard-to-reach spot. Here’s how to do it: first, get under the glove compartment.

Remove the two screws holding the glove compartment in place. Then, there are three more screws under the dashboard; pull the plastic towards you (not down) and disconnect the clips.

Now you can see the filter cover; pull it towards you and remove the dirty filter. Clean the area with compressed air to remove dust and dirt.

Install the new filter, ensuring the arrow points down. Snap the cover back in place, reassemble the plastics, reconnect the clips, and then replace the screws.

The job is complete.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the BMW Z4 E85.
How to replace the air filter of the BMW Z4 E85.
BMW Z4 (2002-2008 / E85, E86) To correctly replace the engine air filter in your BMW Z4 E85, simply follow these steps one by one. First, purchase a new air filter and ensure that…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Z4 (2002-2008 / E85, E86) This video explains how to replace the cabin air filter. First, unscrew the two screws located under the glove compartment on the passenger side and …
How to Remove the Cabin Air Filter on a BMW Z4
How to Remove the Cabin Air Filter on a BMW Z4
BMW Z4 (2002-2008 / E85, E86) Let's change the cabin air filter on a BMW Z4. Open the right door and access the interior; use the appropriate wrench to remove the screws located u…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos