Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Removal Instructions for BMW Z4

Model: BMW Z4 E85, E86 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Dashboard

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions on how to remove the dashboard of a BMW Z4. First, get inside the car and start by removing the headlight switch trim by prying the sides with something thin. Next, remove the screws found inside the air vents, also taking them out. At this point, you can remove the center console by gently prying on the sides at multiple points.

Once removed, you can replace or modify it, as in this case. Finally, reassemble it by applying the reverse procedure!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Navigation Display
Instructions for Removing the Navigation Display
BMW Z4 (2002-2008 / E85, E86) To remove the navigation display located in the center of the dashboard, first remove the air vents and then the radio. The air vents are secured wit…
Where Are the Fuses Located on a BMW Z4?
Where Are the Fuses Located on a BMW Z4?
BMW Z4 (2009-2016 / E89) Each fuse in the BMW Z4 is located inside the only fuse box installed in the vehicle: in this type of vehicle, you can find the fuse box inside the c…
How to Reset the Engine Oil Light on a BMW Z4 E89
How to Reset the Engine Oil Light on a BMW Z4 E89
BMW Z4 (2002-2008 / E85, E86) This short video tutorial explains how to reset the engine oil light on your BMW Z4 E89 (the procedure is the same for similar models, such as 128i, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos