Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the BMW Z4?

Model: BMW Z4 E89 - Years 2009-2016
Part: Cabin air filter

In this tutorial, we can see how to replace the cabin filter in the BMW Z4, a very simple and quick operation. First of all, go to the passenger side, then position yourself under the dashboard and remove the lower cover of the glove compartment by unscrewing the screws with a cross-tip screwdriver. Then open the long rectangular door by releasing the clip, remove the old filter and clean the housing from any dirt residue. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a BMW Z4
How to Replace the Cabin Filter on a BMW Z4
BMW Z4 (2002-2008 / E85, E86) In this video tutorial, you can see how to replace the cabin filter on a BMW Z4 by following some key steps: the filter replacement should be done ev…
How to replace the air filter of the BMW Z4 E85.
How to replace the air filter of the BMW Z4 E85.
BMW Z4 (2002-2008 / E85, E86) To correctly replace the engine air filter in your BMW Z4 E85, simply follow these steps one by one. First, purchase a new air filter and ensure that…
How to Change the Cabin Air Filter on the BMW Z4
BMW Z4 (2002-2008 / E85, E86) Changing the cabin air filter on the BMW Z4 is not easy because it is located in a hard-to-reach spot. Here’s how to do it: first, get under the glov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos