Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radiator

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Radiator

A well-functioning radiator is essential to ensure that the car always runs at its best and to avoid engine troubles. Replacing it is not particularly difficult. It is preferable to perform the operation when the system is cold to avoid burns. Disconnect the coolant hose, placing a drain pan underneath to catch the fluid. Once the lower hose and return hose are disconnected, remove the mounting points and then the radiator. Position the new radiator and connect the hoses, filling the reservoir with coolant.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a New Radiator
Installing a New Radiator
BMW Serie 5 (1995-2003 / E39) This video tutorial shows how to install a new radiator on a BMW 5 Series. The video starts with a comparison between the old and new radiator. Since…
Radiator Coolant Replacement
Radiator Coolant Replacement
BMW Serie 5 (1995-2003 / E39) The engine coolant also serves to heat the cabin: the system consists of a radiator through which the coolant flows, which, once heated, warms the su…
How to Replace the Coolant in a BMW 5 Series
How to Replace the Coolant in a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Learn how to replace the coolant in the radiator of a BMW 5 Series. Disconnect the radiator valve at the bottom using pliers, and let the rusty, dirt…

Other guides you may be interested in

How to Remove the Front Bumper on a Renault Clio

Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins of the upper cover of the front bumper using a socket wrench. Unscrew the screws on the front bumper, unscrew the screws under the splash guard and under the bumper. Remove the bumper from the body of the vehicle, unscrew the pins located at the side of the headlight (if you need to replace it). Fit the new bumper with the associated pins onto the vehicle, following the steps taken during disassembly.

Watch the video!


by ScegliAuto

More videos