Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a BMW 5 Series

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to replace the coolant in the radiator of a BMW 5 Series. Disconnect the radiator valve at the bottom using pliers, and let the rusty, dirty fluid drain into a container.

Flush the cooling system with a suitable flushing fluid, and repeat this process until the hoses and radiator are completely clean. Close the valve that was previously opened, and tighten the metal clamp bolts of the radiator in the engine compartment.

Prepare to refill with the new coolant. Check for any leaks in the system.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Coolant Restoration
Coolant Restoration
BMW Serie 5 (2003-2010 / E60, E61) If a leak in the engine cooling system has caused a drop in the coolant level, you must act immediately. For restoration, you need specific equipment…
How to Top Off the Coolant in a BMW 5 Series
How to Top Off the Coolant in a BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Here’s how to top off the coolant (antifreeze) in your vehicle: open the hood, wait for the engine to cool down, and locate the coolant reservoir on …
Tips for the Thermostat in Case of Engine Overheating
Tips for the Thermostat in Case of Engine Overheating
BMW Serie 5 (1995-2003 / E39) This video provides some tips regarding the proper functionality of the thermostat in a BMW 5 Series. The thermostat is the valve that opens and clos…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos