Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Car radio disassembly instructions

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Car stereo
Operation: Car radio disassembly instructions

Damage to the car radio display is a fairly recurring defect in BMWs and often becomes illegible: luckily it is possible to buy a new compatible display in the after market that allows you to remedy this defect at fairly low cost; in any case, for the replacement of the display, it is suggested to seek help from those who have a minimum of competence as a radio technician. The disassembly of the car radio is extremely simple: once the volume control knob has been removed (just pull it away), there is a small hole where a small screwdriver must be inserted to rotate and release the fixing spring. (pry along the edge to facilitate extraction)


Posted on 26 July 2023 by ScegliAuto



Car radio disassembly instructions
BMW Serie 5 (2003-2010 / E61, E60) To facilitate disassembly, move the gear lever all the way back and protect it with a cloth to prevent it from being scratched. Subsequently, with pl
Disassembly of the radio and navigator display
BMW Serie 5 (2010-2017 / F11, F10) If you need to disassemble the car stereo or the navigator display, following the images in the video you will understand that it is not as difficult
Disassembly of the dashboard and the radio
BMW Serie 5 (2010-2017 / F11, F10) You probably observe the front part of the cockpit every day and you would never dream of taking it apart. However, if you feel like doing it, know t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos