Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Center Console in Your Car

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Center console tunnel

See other generations:
Video tutorial

This guide shows how to disassemble and reassemble the center console of your car. Perform the following operations: Remove the shift knob by pulling it firmly upward, and if possible, use one hand to hold the shift lever. Disassemble the radio, being careful not to damage the console.

Once the radio is removed, unscrew the 4 screws located in the radio compartment. Next, remove the cigarette lighter, which is also clipped in. Now, disconnect the fan control block, then lift the two levers above and push the three knobs inward, separating the entire block from the console.

Carefully, it will detach on its own, paying close attention to the connectors attached to it.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Removing the Center Console of Your Car
Removing the Center Console of Your Car
BMW Serie 5 (1995-2003 / E39) The following guide shows how to remove the center console of your car, which is the part located between the two front seats, housing the parking br…
Replacing Automotive Bushings
Replacing Automotive Bushings
BMW Serie 5 (1995-2003 / E39) When the bushings in your car wear out, they can be replaced. You can purchase new ones as replacement parts. Their removal is not an impossible task…
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
BMW Serie 5 (2003-2010 / E60, E61) If your car has high mileage, it is necessary to replace the shock absorbers. They can be easily found at any auto parts store. The replacement proce…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos