Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Automotive Bushings

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Bushings

See other generations:
Video tutorial

When the bushings in your car wear out, they can be replaced. You can purchase new ones as replacement parts.

Their removal is not an impossible task. The stabilizer bar should be unlinked to facilitate the removal of the bushings.

Simply disconnect the link at the end that connects to the bar and above the shock absorber, making the job easier. When reinstalled, they should be well greased to ensure they fit properly.

In some cases, it may be necessary to use something to help push them in. This should also eliminate any noise present in the car.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Engine Oil Change for Your Car
Engine Oil Change for Your Car
BMW Serie 5 (2003-2010 / E60, E61) The frequency of oil changes depends on how you use your car. Usually, this maintenance is performed by a professional mechanic, but you can also do …
How to Replace the Headlight Bulbs on a BMW 5 Series
How to Replace the Headlight Bulbs on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Let's replace the headlight bulbs on a BMW 5 Series. Start by removing the plastic cover located at the bottom of the bumper using a suitable screwdr…
Replacing the Car Radiator
Replacing the Car Radiator
BMW Serie 5 (1995-2003 / E39) A well-functioning radiator is essential to ensure that the car always runs at its best and to avoid engine troubles. Replacing it is not particularl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos