Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bushing on BMW 5 Series

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Bushings

See other generations:
Video tutorial

Hello, in this video, you will see how to replace the bushing on your BMW 5 Series. To remove the worn bushing, you need to disassemble the driveshaft, located next to the exhaust.

Once removed, take apart the two sections of the driveshaft using a wrench. After that, use a hammer and chisel to tap on the affected area to remove it. Once this is done, you can insert the seal with the new bushing.

With the help of the hammer and chisel, tap on it to secure it properly. Then, you can reassemble the other part of the driveshaft.

Once you have done that, you can reassemble everything.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Passenger Seat from a BMW 5 Series
How to Remove the Front Passenger Seat from a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Before you start, open the front passenger door of your BMW 5 Series. First, fully slide back the seat track covers. Next, remove the bolts that secu…
How to Replace the Hydraulic Lift Supports of the Trunk Lid on a BMW 5 Series
How to Replace the Hydraulic Lift Supports of the Trunk Lid on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Before you start, open the trunk lid of your BMW 5 Series. Begin by releasing the clips that secure the hydraulic lift supports, using a flathead scr…
How to Install or Replace Welcome Light on BMW 3 Series - 4 Series - 5 Series
How to Install or Replace Welcome Light on BMW 3 Series - 4 Series - 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this tutorial video, you will see how to install or replace the welcome light bulb found on the door of a BMW 5 Series, but also on the 3 Series a…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos