Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension Bushing on the BMW E46?

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Bushings

See other generations:
Video tutorial

Replacing the suspension bushing on the BMW 3 Series E46 is a straightforward task. You will need, in addition to the replacement bushing, a 16mm socket wrench and a jack to help access the underside.

Lift the car and go underneath it, near the suspension. Using the socket wrench, remove the two bolts that secure the bushing to the frame, then extract it from the suspension arm. You may need to apply some force.

Once removed, install the new bushing ensuring it is properly seated and secure it by tightening the two bolts.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing Suspension Arm Bushings
Replacing Suspension Arm Bushings
BMW Serie 3 (1998-2006 / E46) If the bushings of the suspension control arm are damaged, you can purchase just the replacement bushings (silent block) instead of the entire arm. T…
Replacing the Silent Block Bushing
Replacing the Silent Block Bushing
BMW Serie 3 (1998-2006 / E46) The failure of the silent block bushing on the suspension control arm is a common issue in BMW models, but the repair is straightforward since you ca…
How to Replace the Control Arm Support on BMW 3 Series E46
How to Replace the Control Arm Support on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) The failure of the control arm support bushing in the front suspension (commonly known as a silent block) is a frequent issue on this car model. In t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos