Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Control Arm Support on BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Suspension system

See other generations:
Video tutorial

The failure of the control arm support bushing in the front suspension (commonly known as a silent block) is a frequent issue on this car model. In the aftermarket, you can find this replacement part even under the name of reinforced type.

Replacing it is quite simple, especially since you can do it without removing the control arm itself. Lift the vehicle, unscrew the two mounting bolts of the aluminum support that houses the rubber bushing, and remove it from the control arm. Then, insert the new bushing using a lever and secure it with the two mounting bolts.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing Suspension Control Arm
Replacing Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the rubber part of the bushings on the suspension control arms is a common issue on these models. You can either replace the entire co…
Replacing the Silent Block Bushing
Replacing the Silent Block Bushing
BMW Serie 3 (1998-2006 / E46) The failure of the silent block bushing on the suspension control arm is a common issue in BMW models, but the repair is straightforward since you ca…
Instructions for Disassembling the Suspension Control Arm
Instructions for Disassembling the Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The suspension control arm has a triangular shape and is secured at three points: to the wheel hub via a ball joint, to the vehicle frame at the rear…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos