Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Suspension Arm Bushings

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Bushings

See other generations:
Video tutorial

If the bushings of the suspension control arm are damaged, you can purchase just the replacement bushings (silent block) instead of the entire arm. The repair involves removing the old bushing from its seat and inserting the new one: often, you can perform this operation without even removing the suspension from the vehicle.

Once the old bushing is removed, clean and lubricate the bushing seat thoroughly before inserting the new one. To install the new bushing, it is recommended to use a C-clamp.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Suspension Control Arm Bushing Replacement
Suspension Control Arm Bushing Replacement
BMW Serie 3 (1998-2006 / E46) The necessary tools are a ratchet wrench, a set of combination wrenches, a bushing installer, and replacement bushings. Lift the vehicle on a lift to…
Replacing Suspension Arm Bushings
Replacing Suspension Arm Bushings
BMW Serie 3 (1998-2006 / E46) The necessary tools are a ratchet wrench, a set of open-end wrenches, a bushing installer, and replacement bushings. Lift the car on a lift and remov…
Replacing the Front Suspension Control Arm
Replacing the Front Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) Lift the vehicle on a lift and locate the control arm of the suspension, which is triangular in shape and connected to the hub and the vehicle's fram…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos