Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Shock Absorbers

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shocks

See other generations:
Video tutorial

If your car has high mileage, it is necessary to replace the shock absorbers. They can be easily found at any auto parts store.

The replacement process is quite complex, but it can be done independently without needing to go to a trusted mechanic, allowing you to save a significant amount of money. You will need a compressor, or alternatively, a pneumatic gun; a spring compressor; and finally, a jack.

First, loosen the bolts, then take the jack, position it correctly, and begin to lift your car on the left side. At this point, you can completely unscrew the bolts and remove the wheel.

Next, open the hood and remove all the screws you find above the shock absorber mount. Then, remove the two screws on the spindle and the one located on the stabilizer that runs parallel to the affected shock absorber.

Now you will notice that the shock absorber will come out very easily.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing Front Shock Absorber Springs
Replacing Front Shock Absorber Springs
BMW Serie 5 (1995-2003 / E39) To replace the front shock absorber springs, you need to remove the shock absorbers and have the appropriate clamps to compress them. Start by liftin…
Engine Oil Change for Your Car
Engine Oil Change for Your Car
BMW Serie 5 (2003-2010 / E60, E61) The frequency of oil changes depends on how you use your car. Usually, this maintenance is performed by a professional mechanic, but you can also do …
How to Replace the Front Shocks on a BMW 5 Series?
How to Replace the Front Shocks on a BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) In this tutorial, you will see how to replace the front shocks on a BMW 5 Series, a task that requires good manual skills. First, lift the side you w…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos