Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Shock Absorber Springs

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Suspension system

See other generations:
Video tutorial

To replace the front shock absorber springs, you need to remove the shock absorbers and have the appropriate clamps to compress them. Start by lifting the vehicle and removing the front wheel.

Disconnect the tie rod end from the hub support, then disconnect the sway bar links from the suspension control arm. Next, remove the shock absorber mounting bolt from the hub support and widen it enough to extract it. Lower the vehicle to access the engine compartment and remove the shock absorber mount from the body strut tower.

Once the shock absorber is removed, apply the clamps to compress the spring and remove the stem support, extract the spring, and insert the new one. Then reassemble the support and reverse the steps to reinstall it in the vehicle.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Front Shocks
Replacing Front Shocks
BMW Serie 5 (2003-2010 / E60, E61) To replace the front shocks, you first need to have the appropriate clamps to compress the spring so you can remove the shock mount; start by lifting…
How to Replace the Front Shocks on a BMW 5 Series?
How to Replace the Front Shocks on a BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) In this tutorial, you will see how to replace the front shocks on a BMW 5 Series, a task that requires good manual skills. First, lift the side you w…
Instructions for Replacing Air Conditioning Control Buttons
Instructions for Replacing Air Conditioning Control Buttons
BMW Serie 5 (1995-2003 / E39) Replacing the air conditioning control buttons is extremely simple and can be done directly in the vehicle, but for convenience, it is suggested to r…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos