Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Suspension Control Arm

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Control arm

Lift the vehicle on appropriate jack stands and remove the rear wheel; then remove the plastic wheel well liner to access the mounting pins of the control arms to the suspension arm more easily. While removing the control arms, support the suspension with a jack. Next, remove the nut securing the control arm to the hub while holding the control arm shaft with a 7 mm wrench. Also, remove the mounting pin of the control arm from the suspension arm and take it out of its seat. Then, install the new control arm and tighten the respective mounting pins.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Shock Absorber Replacement
Front Shock Absorber Replacement
BMW Serie 5 (1995-2003 / E39) In the engine compartment, use a ratchet to remove the three bolts at the top of the suspension. Loosen the wheel nuts and lift the vehicle, securing…
Check Control Arm and Suspension
Check Control Arm and Suspension
BMW Serie 5 (1995-2003 / E39) This video illustrates how to check the control arm and its suspension on your car. How do you know when your control arm needs to be replaced? Simpl…
Replacing the Rear Link
Replacing the Rear Link
BMW Serie 5 (1995-2003 / E39) If you hear noise coming from the rear suspension, especially when driving over rough terrain, it is likely due to the failure of the link ends conne…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos