Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the BMW 3 Series E46 service warning light?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Service warning light

To reset the BMW 3 Series E46 Service warning light, press and hold the button located on the left side of the instrument panel, while this is off. Therefore, at this point, it will be necessary to insert the ignition key in the relative block, turning on the panel until the message "reset" appears. When this appears, release the button and then press it again: in this case, keep it pressed until the writing has completely disappeared from the panel. It will be possible to verify the correctness of the reset by switching the instrument panel off and on.

Posted on 28 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BMW 3 Series E46 service warning light?
How do you reset the BMW 3 Series E46 service warning light?
BMW Serie 3 (1998-2006 / E46) The reset of the Service warning light on the instrument panel of the BMW 3 Series E46 is performed by switching on the instrument panel and holding …
How to reset the service light on BMW 3 Series E46
How to reset the service light on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) Let's see thanks to this short video tutorial how to perform the service light reset on a third-generation BMW 3 Series e46, a model produced from 19…
How can I reset the service light on my BMW 3 Series E46?
How can I reset the service light on my BMW 3 Series E46?
BMW Serie 3 (1998-2006 / E46) Resetting the service warning light on your BMW 3 Series E46 is really simple, and you won't need any tools. Insert the ignition key without turning …

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos