Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Cabin Fuse Box in the BMW X1

Model: BMW X1 E84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

See other generations:
Video tutorial

The BMW X1 series E84 is the first generation of the Bavarian crossover and was introduced in 2008. To access the cabin fuse box, open the glove compartment on the passenger side and disengage the sliding locks on the sides of the compartment. This will allow you to fully tilt the compartment down.

At the back of the compartment is the fuse box along with a sheet listing the fuses. At this point, you can check, verify, and if necessary, replace any blown fuses.

Finally, reverse the steps to reassemble the components.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the BMW X1?
Where is the fuse box located in the BMW X1?
BMW X1 (2009-2015 / E84) The BMW X1 model e84 has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the passenger side glove compartm…
Where is the Fuse Box in the BMW X1?
Where is the Fuse Box in the BMW X1?
BMW X1 (2009-2015 / E84) In this video, see where the fuse box is located in the first generation BMW X1 E84. This operation is necessary if you need to replace one or more f…
Where are the fuse boxes located in the BMW X1?
Where are the fuse boxes located in the BMW X1?
BMW X1 (2015-2022 / F48) The BMW X1 produced from 2016 to 2022 has three fuse boxes. The first and third fuse boxes are located inside the cabin. Specifically, the first fuse…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos