Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X1
    4. : How to adjust the clock on the BMW X1?

BMW X1 - Video tutorial

Model: BMW X1 F48 - Years 2015-2022
Part: -board computer
Operation: How to adjust the clock on the BMW X1?

Below I describe how to change the time on the car: access the passenger compartment, sit in the driver's seat and turn on the ignition, locate on the multifunction lever on the left, the ring that allows you to navigate within the functions of the on-board computer , then turn this dial until you reach the time indication. On the terminal of the multifunction lever on the left there is the command "BC", then press this command, at this point the time will be highlighted and by turning the ring it will be possible to change it, to save the new value it is necessary to press again on " BC ". Then follow the same procedure to change the minutes.


Posted on 4 May 2024 by ScegliAuto



How to set the date and time on the BMW X1.
BMW X1 (2015-2022 / F48) Below we will see the steps that will allow us to adjust the time and date of the BMW X1, following the instructions below. First, we get on board th
Clock adjustment on BMW X1
BMW X1 (2015-2022 / F48) To set the time of your BMW car, you need to enter the I-Drive on-board computer and its settings. So, turn on the instrument panel (not the engine,
How to configure the position of the rear seats in the BMW X1
BMW X1 (2015-2022 / F48) In this short and simple guide, we will see how to configure the position of the rear seats of the BMW X1, following the instructions provided below.

    Frequently Asked Questions

    • X1 2015-2022 - What does the engine warning light on BMW X1 mean? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos