Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to disassemble the belt tensioner of the Bmw X3 E83

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Operation: How to disassemble the belt tensioner of the Bmw X3 E83

In this video, let's see how to disassemble the belt tensioner of the Bmw X3 E83, first generation, following the instructions below. First of all let's disassemble the front bumper and start by removing our V-belt, loosening our belt pretensioner; then we use an extension socket to unscrew the central bolt of our tensioner, as shown in the video. At this point we can remove it and replace it with the new one, inserting it correctly; So let's go put our V-belt and front bumper back together!


Posted on 20 November 2022 by ScegliAuto



How to replace the V-belt of a BMW X3?
BMW X3 (2003-2010 / MK 1, E83) Before we can begin, we will have to open the front hood of our BMW X3. So let's start by disengaging and removing the top engine cover. After that,
How to replace the V-belt of a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Before we begin, we will have to go and open the front hood of our BMW X3. So let's start by disengaging and removing the top engine cover, then remo
How to replace the timing belt on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Unhook and lift the hood, then it will be necessary to remove all the parts above the area where it will be necessary to operate, as indicated in the

    Frequently Asked Questions

    • X3 2010-2017 - How much coolant should be added to the BMW X3? Read Answer
    • X3 2010-2017 - Why does the BMW X3 not turn on? Read Answer
    • X3 2003-2010 - When does the 4x4 warning light on the BMW X3 come on? Read Answer
    • X3 2017-2024 - What problems with the transfer case of the BMW X3? Read Answer
    • X3 2003-2010 - What warning lights are there on the BMW dashboard? Read Answer
    • X3 2010-2017 - Where is the fuse for the ignition of the instrument cluster located in a BMW X3? Read Answer
    • X3 2003-2010 - How can I remove the BMW X3 windshield seal? Read Answer
    • X3 2003-2010 - What does the BMW X3 transfer case fuse check? Read Answer
    • X3 2003-2010 - How much does a manifold cost for BMW X3? Read Answer
    • X3 2003-2010 - Where is the inertia switch located in a BMW X3? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos