Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wheel Bearing on a BMW 5 Series E28

Model: BMW Serie 5 E28 - Years: 1981, 1982, 1983, 1984, 1985, 1986, 1987
Part: Bearing

See other generations:
Video tutorial

In this tutorial, learn how to remove and replace the rear wheel bearing on a BMW 5 Series E28, second generation. First, lift the vehicle and remove the rear wheel; then, remove the rear brake caliper by unscrewing the bolts, and disconnect the rear axle from the wheel bearing.

At this point, use a bearing puller to remove the old bearing; now, clean the bearing seat thoroughly to install the new one. Center the new bearing and tap it in with a soft material until it is fully seated; finally, install the metal circlip.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on a BMW 5 Series E34
Replacing the Rear Wheel Bearing on a BMW 5 Series E34
BMW Serie 5 (1988-1995 / E34) Today, we will see, in this video tutorial, the instructions on how to disassemble and replace the rear wheel bearing on a BMW 5 Series E34. First, l…
What is the fuse diagram for the BMW 5 Series?
What is the fuse diagram for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) The fuse diagram for the BMW 5 Series F10 and F11 is detailed in the owner's manual. If this is lost, refer to the diagram shown in the attached vide…
Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos