Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Automatic Gearbox Oil of the BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Transmission fluid

To change the automatic gearbox oil of the BMW 1 Series, lift the car using a ramp to access the underside. Around the gearbox, you will find various pipes that need to be disconnected while collecting the oil in a container. Next, loosen the screws securing the cover of the lower part of the gearbox to allow any remaining oil to drain out. By connecting the machinery to the drain plug, you can then insert the new oil and close the plug.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Automatic Gearbox on BMW 1 Series F20
Reset Automatic Gearbox on BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In today's tutorial, you will learn how to reset the automatic gearbox on a BMW 1 Series F20, second generation. First, get inside the car and turn o…
Replacement of Gearbox Oil and Complete Maintenance
Replacement of Gearbox Oil and Complete Maintenance
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) For issues with gear engagement, especially third gear, replace the oil in the gearbox and flush it. Lift the vehicle on a ramp. Add the flushing add…
How to Change the Gear Oil in a BMW 1 Series
How to Change the Gear Oil in a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this guide, learn how to change the gear oil in a BMW 1 Series. Position the car on a column lift and raise it to a comfortable height for disasse…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos