Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to disassemble the steering wheel and airbag on a BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Steering wheel
Operation: How to disassemble the steering wheel and airbag on a BMW 3 Series

A very simple method to remove the steering wheel and airbag on the BMW £ Series, simply with a screwdriver and a. Pen. These two tools must be inserted into the holes behind the steering wheel, as shown in the video. When they are both in place, press them simultaneously. The airbag will pop up allowing you to remove the entire blockage. At this point, to remove the steering wheel as well, you just have to remove the electrical connectors and unscrew the central bolt. Make a mark on this with the marker to be sure to close it up to the right initial tension. If you also want to remove the steering wheel controls, there are three torx screws behind each side, which will allow you to remove them, disconnecting the electrical parts.


Posted on 11 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos