Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the steering wheel airbag of the BMW 3 Series.

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Airbags
Operation: How to remove the steering wheel airbag of the BMW 3 Series.

The steps illustrated in this guide will show us how to disassemble and replace the steering wheel airbag of the BMW 3 Series. First, we get inside the car, on the driver's side, and start pushing on the rear holes of the steering wheel using something thin and pointed like a flathead screwdriver; then we remove the airbag from the steering wheel, disconnecting the electrical connector that we find on the back, as shown in the video. At this point, we install the new airbag, making the electrical connection and securing it perfectly onto the steering wheel, following the video tutorial until the end!


Posted on 13 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 1998-2006 - How do you turn off the airbag warning light in the BMW E46? Read Answer
    • Serie 3 2005-2013 - Why did the airbag warning light come on in the BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - If the airbag warning light of a BMW 320 touring is always on, what to check? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos