Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headliner and Roof Handles of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Handle

In this video tutorial, you will learn how to remove the headliner, roof handles, and sun visors of the BMW 3 Series by following the instructions below. First, get inside the vehicle and start by removing the plastic pillars, prying them off the sides to disengage them; then, unscrew the screws for the sun visors, as shown in the video. At this point, remove the handles located on the headliner; take off the plastic caps and unscrew the screws. Finally, pry off the sides of the trim to remove it completely, following the video until the end!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner from a BMW 3 Series E90, a very simple task. To do this, you will only need a flathead scr…
How to remove the roof sky of the BMW 3 Series
How to remove the roof sky of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these brief instructions, we will see how to dismantle and replace the headliner or interior roof lining of the BMW 3 Series. First of all,…
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
BMW Serie 3 (1998-2006 / E46) How do you remove the soundproofing panel of a BMW 3 Series roof? Let's see in this video how to proceed. Start by removing the side handles of the h…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos