Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Headlight replacement

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Headlight
Operation: Headlight replacement

In some cars it is possible to replace the headlight independently without necessarily having to resort to the help of a specialist in the sector. If the car has been started, it is advisable to wait at least an hour before starting to work on it, in order to avoid getting burned by the heat. The light to be changed is connected to the bodywork with screws and to the battery with cables. First of all, the plugs of the light cables must be removed and, subsequently, with a Phillips screwdriver, the internal screws of the light that bind it to the bodywork must be removed. The old light must be removed by pushing the part of the light inside the bonnet outwards and the new light can be inserted in the housing where the old one was previously placed, trying to fit it perfectly.


Posted on 11 August 2023 by ScegliAuto



Headlight bulb replacement
BMW Serie 5 (2003-2010 / E61, E60) If the headlight bulbs need to be replaced, the headlight itself must be removed: this operation is extremely simple as it will not be necessary to r
Bmw 5 Series bulb replacement
BMW Serie 5 (2010-2017 / F11, F10) Are the bulbs damaged? Let's see the replacement of the bulbs of the BMW 5 Series headlights. We lift the front hood, we find the caps placed behind
How to change headlight bulbs on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) BMW 5 bulbs burned out? Let's see the replacement. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's pu

Other guides that may interest you

    Frequently Asked Questions

    • Serie 5 2017-2024 - Bmw 5 series low beam headlight price Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos