Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why is the Brake Pad Warning Light On in the BMW 5 Series and How to Reset It?

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Warning light – error code

If the brake pad warning light is on in your BMW 5 Series, it means the pads have worn down to the point where they need to be replaced. You can either take it to your trusted shop or proceed on your own if you have the necessary skills. Once you decide to do it yourself, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the ignition, then enter the maintenance menu by pressing the button located on the left side of the dashboard. Once inside, navigate to the section for replaced pads and press the same button once to start the reset, and a second time to confirm it.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Pad Warning Light on the BMW 5 Series F10
How to Reset the Brake Pad Warning Light on the BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) In today's video, you will see the procedure needed to reset the worn brake pad warning light on the BMW 5 Series F10 in simple and quick steps. Firs…
How to Reset the "Brake Pad" Light on a BMW 5 Series
How to Reset the "Brake Pad" Light on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Before you begin, sit in the driver's seat of your BMW 5 Series. Start by activating the instrument cluster by pressing the appropriate button. Next,…
How to Reset the Brake Pad Replacement Light on BMW 5 Series (F11)?
How to Reset the Brake Pad Replacement Light on BMW 5 Series (F11)?
BMW Serie 5 (2010-2017 / F11, F10) If the brake pad replacement light appears on the dashboard of BMW 5 Series (F11) models produced from 2010 to 2017, first check through the onboard …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos