Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Intake Manifold Gasket

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Engine

The intake manifold of the car is a device designed to evacuate exhaust gases from the cylinders. Working at high temperatures, the gasket of this manifold can easily deteriorate. Removing the intake manifold and replacing its gasket is a fairly simple operation that does not require special maneuvers. Just proceed by unscrewing the bolts and nuts. Be careful when installing the new gasket because improper application on the new manifold could cause gas leaks.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust Manifold Gasket on BMW 3 Series
How to Replace the Exhaust Manifold Gasket on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) .. To replace the intake manifold gasket on a BMW 3 Series, open the hood to access the components inside the engine bay... …
Replacing the Intake Manifold
Replacing the Intake Manifold
BMW Serie 3 (1998-2006 / E46) .. of the engine. It is secured to the engine by an intake manifold gasket, which can be made of plastic or rubber and directs the air-fuel mixture into.. …
Replace the Intake Manifold and Gasket on BMW 3 Series E36
Replace the Intake Manifold and Gasket on BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to remove and replace the intake manifold and its gasket on the BMW 3 Series E36. First, open the hood and start by removing t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos