Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Cleaning of the Intake Manifold

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine

See other generations:
Video tutorial

This operation requires precision and attention to detail since there are many components to remove before accessing the intake manifold. Start by removing the plastic cover on top of the engine; then proceed to disassemble the cabin filter cover located just below the windshield, in the center position; next, remove the cabin filter and its housing; disconnect the grommet and other plastic supports to reach the removal of the intake manifold cover.

Disconnect the gasket and the fasteners of the intermediate cover, where the oil dipstick is also attached. Disconnect the connectors linked to the injectors and remove the EGR valve.

At this point, proceed to remove the fastening pins of the manifold and take it off, being careful with the gaskets and the connector linked to the sensor. Protect the intake ports on the engine with paper to prevent foreign objects from entering.

Remove the vacuum actuator from the manifold and the linkage arm. Clean the manifold thoroughly with diesel fuel and reassemble everything, replacing the gaskets.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Intake Manifold Gasket
Intake Manifold Gasket
BMW Serie 3 (1990-2001 / E36) The intake manifold of the car is a device designed to evacuate exhaust gases from the cylinders. Working at high temperatures, the gasket of this ma…
Replacing the Intake Manifold
Replacing the Intake Manifold
BMW Serie 3 (1998-2006 / E46) The intake manifold is a cover made of aluminum, steel, or plastic located on top of the engine. It is secured to the engine by an intake manifold ga…
How to Clean the EGR Valve Without Removing It in the BMW 3 Series
How to Clean the EGR Valve Without Removing It in the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In today's video, you will see how to clean the intake manifold and the EGR valve without removing it from its location. Specifically, this procedure…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos