Do it yourself
Frequently asked questions about cars and motorcycles

Adjusting the AC Compressor Belt Tensioner

Model: BMW Serie 7 E38, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: V-belt

See other generations:
Video tutorial

Adjusting the tensioner for the AC compressor drive belt is very simple: the tensioner is a pneumatic jack mounted to the engine block via a plate that allows for adjustment. The plate has a mounting pin that acts as a pivot and a slot for adjustment.

First, loosen the pin with a 10 mm wrench located in the slot. Then, use a 17 mm wrench to rotate the plate to tension the auxiliary belt.

While keeping the belt tensioned, tighten the 10 mm pin to secure the tensioner.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Kia Rio (2005-2011 / MK 2, DE) The car model in question is equipped with two auxiliary belts, one dedicated to the power steering pump and one that drives the alternator and air c…
Kia Rio (2005-2011 / MK 2, DE) The vehicle model in question is equipped with two auxiliary belts, one dedicated to the power steering pump and the other that drives the alternator…
BMW BMW Various In this video tutorial, you will learn how to remove the air conditioning compressor from various models of BMW, Audi, and Mercedes. First, access th…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos