Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X6
    4. : How to remove the traction divider in BMW X6

BMW X6 - Video tutorial

Model: BMW X6 E71, MK 1 - Years 2007-2014
Part: Checks and maintenance
Operation: How to remove the traction divider in BMW X6

In today's video we see how to remove the traction divider in the BMW X6. First we proceed by lifting the car onto the bridge. We identify the component in question in the central area of the car. We proceed with the complete removal of the drain line. Once this is done we must also remove the metal cover that we find in front of you. Possible causes include worn clutches or used oil. Finally, we can remove the distributor in question. You can then proceed to its repair or maintenance of the piece. Follow the steps backwards to reassemble.


Posted on 29 November 2022 by ScegliAuto

    Frequently Asked Questions

    • X6 2014-2019 - How to solve problems with the self-leveling suspension of the BMW X6? Read Answer
    • X6 2007-2014 - How to reset the malfunction of the self-leveling suspension of the BMW X6? Read Answer
    • X6 2007-2014 - How does the self-leveling suspension of a BMW X6 work? Read Answer
    • X6 2014-2019 - How much does it cost to maintain a BMW X6? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos