Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Pedal in a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Clutch

In this tutorial, you will see how to replace the clutch pedal in a BMW 3 Series E92. Start by removing the floor mat. Then, using a Torx T20 screwdriver, remove the three screws securing the lower dashboard panel and take it off. Next, extract the indicated plastic pin by pushing it with a socket wrench, disconnect the return spring, and remove the two clips securing the main spring. Once the main spring is removed, you can finally disengage the pedal from the bracket and install the replacement by following the reverse procedure.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Clutch Pedal on a BMW 3 Series
How to Remove the Clutch Pedal on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) In today's tutorial video, you will learn the main instructions on how to remove and replace the clutch pedal, along with all the other pedals, on a …
Replacing the Master Cylinder for the Clutch Pedal
Replacing the Master Cylinder for the Clutch Pedal
BMW Serie 3 (1990-2001 / E36) The master cylinder for the hydraulic circuit that operates the clutch release bearing is installed on the clutch pedal. Its replacement is fairly st…
Removing the Accelerator Pedal of the BMW 3 Series E46
Removing the Accelerator Pedal of the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see instructions on how to remove and replace the accelerator pedal of the BMW 3 Series E46. First, get in the vehicle and gr…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cost of replacing the clutch for a BMW 320d? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos