Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Brake Button on BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Checks and maintenance

Let's see how to remove the brake pedal button on a BMW 3 Series. Open the door and locate the plastic panels to remove under the dashboard (footwell). Use a screwdriver to remove the screws from the plastic cover under the dashboard, then pry off the cover (where the pedal button is located). Unscrew the button kit from the brake pedal side. Insert a new brake button, screw in the screws, and connect the power. Finally, reinstall the inspection cover and tighten the screws. Test the operation of the brake pedal button.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handbrake Lever Cover of a BMW 3 Series
How to Remove the Handbrake Lever Cover of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Do you want to remove the handbrake lever cover of a BMW 3 Series? Let's see how to proceed in this video. Using a plastic trim tool, remove the leat…
Remove the Brake Rotor on BMW 3
Remove the Brake Rotor on BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Removing the brake rotor from the BMW 3? Let's see how to take it off from above the wheel hub. Raise the vehicle to a comfortable height to work on …
How to Remove the Handbrake Lever Cover on BMW 3 Series E90
How to Remove the Handbrake Lever Cover on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you will learn how to remove the handbrake lever cover on a BMW 3 Series E90 by following these simple steps. First, get inside the ca…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos