Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handbrake Lever Cover of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

Do you want to remove the handbrake lever cover of a BMW 3 Series? Let's see how to proceed in this video. Using a plastic trim tool, remove the leather handbrake lever cover and cut the strap that tightens the plastic part.

Slide off the leather cover and insert the new one. Fit the cover around the handbrake, take the plastic strap, and tighten it around the leather, then cut off the excess tab with a pair of wire cutters. Finally, attach the leather-covered frame to the clips of the handbrake on the center console.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Handbrake Lever Cover on BMW 3 Series E90
How to Remove the Handbrake Lever Cover on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, you will learn how to remove the handbrake lever cover on a BMW 3 Series E90 by following these simple steps. First, get inside the ca…
How to Adjust the Parking Brake on a BMW 3 Series
How to Adjust the Parking Brake on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this video, see how to adjust the parking brake on a BMW 3 Series. Use a screwdriver to remove the cover from the parking brake lever next to the …
How to Adjust the Handbrake on a BMW 3 Series?
How to Adjust the Handbrake on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To adjust the handbrake on a BMW 3 Series, lift the leather cover that surrounds the handbrake lever to access the components underneath. Here, you w…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos