Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Pedal on a BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Clutch

In today's tutorial video, you will learn the main instructions on how to remove and replace the clutch pedal, along with all the other pedals, on a BMW 3 Series. First, get inside the vehicle and start by removing the cover above the pedal assembly, disconnecting the electrical connectors. Next, remove the bolts from the pedal assembly, disconnecting any electrical connectors for the sensors and the metal clutch cable, as shown in the video. At this point, you can install the new pedal assembly if necessary, applying the reverse procedure of disassembly!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Clutch Pedal in a BMW 3 Series?
How to Remove the Clutch Pedal in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to replace the clutch pedal in a BMW 3 Series E92. Start by removing the floor mat. Then, using a Torx T20 screwdr…
Remove the Brake Button on BMW 3 Series
Remove the Brake Button on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to remove the brake pedal button on a BMW 3 Series. Open the door and locate the plastic panels to remove under the dashboard (footwell…
Removing the Accelerator Pedal of the BMW 3 Series E46
Removing the Accelerator Pedal of the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see instructions on how to remove and replace the accelerator pedal of the BMW 3 Series E46. First, get in the vehicle and gr…

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cost of replacing the clutch for a BMW 320d? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos