Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Handle on a BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

To replace the interior handle on a BMW 5 Series, you need to completely remove the corresponding door panel: to do this, you must detach the cover located inside the interior handle housing. This will allow you to remove the screw underneath, along with those located at the bottom of the panel.

Once the panel is removed, you can loosen the screws that secure the interior handle mechanism, disconnecting it from its cable as well. Then, you can install a new handle and reattach the panel to the door.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
What is the fuse diagram for the BMW 5 Series?
What is the fuse diagram for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) The fuse diagram for the BMW 5 Series F10 and F11 is detailed in the owner's manual. If this is lost, refer to the diagram shown in the attached vide…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos