Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the antenna grommet on a 1989 BMW E30

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E30 - Years 1982-1992
Part: Antenna
Operation: How to replace the antenna grommet on a 1989 BMW E30

In this video tutorial we can see how it is possible to replace the antenna rubber in a 1989 BMW E30 by following a few simple steps: the first thing to do is to buy a new rubber at an authorized spare parts dealer. car. We remove the antenna fasteners from inside the trunk. Once the antenna fasteners have been removed, we can remove the antenna from its seat by exerting a slight downward pressure. We use a pair of pliers to remove the antenna grommet from its seat. We clean the seat where the rubber must be inserted, then insert the new antenna rubber, using the pliers we need to get it completely into the seat (see video). Put the antenna back in place and tighten the fasteners.


Posted on 25 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos