Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Reservoir on a BMW 3 Series E30

Model: BMW Serie 3 E30 - Years: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Windshield wipers

See other generations:
Video tutorial

Before you can start, open the hood of your BMW 3 Series E30. Begin by disconnecting the hoses and connectors attached to the windshield washer reservoir. Next, remove the screws that secure the reservoir to its housing.

This will free the reservoir. At this point, you can pull out and remove the reservoir from its housing, completing the disassembly.

To install the new reservoir, follow this procedure in reverse, and you will have completed the replacement.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to replace the windshield washer fluid reservoir of the BMW 3 Series.
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
BMW Serie 3 (1998-2006 / E46) Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First…
Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …
How to Replace the Windshield Washer Pump on a BMW 3 Series
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos