Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield washer fluid reservoir of the BMW 3 Series.

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First, we open the car's hood and start locating the windshield washer fluid reservoir; then we disconnect the pump tubing and unscrew the fastening screws to remove it (letting all the fluid drain into a container), as shown in the video.

At this point, we replace the windshield washer fluid reservoir with the new one, then install the fluid pump; finally, we top up with the new fluid until reaching the maximum level!


Posted on 7 January 2025 by ScegliAuto


Related tutorials

Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …
How to Replace the Windshield Washer Fluid Reservoir on a BMW 3 Series?
How to Replace the Windshield Washer Fluid Reservoir on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the windshield washer fluid reservoir on a BMW 3 Series, open the hood and locate the reservoir on the left side of the engine compartment…
Replacement of the windshield washer pump of the BMW 3 Series
Replacement of the windshield washer pump of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple steps will show us how to dismantle and replace the windshield washer pump of the BMW 3 Series. First, lift the vehicle and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos