Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Fluid Reservoir on a BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Checks and maintenance

To replace the windshield washer fluid reservoir on a BMW 3 Series, open the hood and locate the reservoir on the left side of the engine compartment. You will see the mounting bolts that need to be removed so the reservoir can be taken out. Once all the bolts are loosened, disconnect the pump at the bottom of the reservoir and completely pull it out. At this point, connect the pump to the new reservoir and insert it into its housing, securing it with the appropriate bolts.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield washer fluid reservoir of the BMW 3 Series.
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
BMW Serie 3 (1998-2006 / E46) Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First…
How to Top Off the Coolant in a BMW 3 Series
How to Top Off the Coolant in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to check and top off the coolant reservoir? Here's how to add coolant to your BMW 3 Series. Pull the plastic lever located at the bottom left of…
Replacement of the windshield washer pump of the BMW 3 Series
Replacement of the windshield washer pump of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) These short and simple steps will show us how to dismantle and replace the windshield washer pump of the BMW 3 Series. First, lift the vehicle and st…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos