|
Do it yourself
| |||
| ||||
Replacing the Windshield Washer Pump in the BMW 3 Series
Model: BMW Serie 3
F31, F30
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Before proceeding with the replacement of the windshield washer pump in the BMW 3 Series, park your car securely on a flat surface or on a lift, ensuring it is stable and safe. This way, you protect the operator's safety while performing the work. This precaution should be taken whenever maintenance is performed on any vehicle. At this point, the first step is to remove the lower plastic trim of the front body, which is secured in place with clips. Also, remove the splash shield (after removing the tire) located inside the right fender by unscrewing the screws that hold it in place (as shown in the images). The windshield washer reservoir is shaped according to the fender and is located inside it, near the outer edge. On the left side of the fender, unscrew the various screws that secure the reservoir, and after disconnecting the various hoses, move it toward the center to access the 3 pumps. The left one is for the rear window, the center one is for the windshield, and the right one is for the headlights. Disconnect the hose and the electrical connector from the center pump and replace it with the new pump. Reassembly follows the reverse of the removal process.
Updated on 5 May 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …
BMW Serie 3
(1990-2001 /
E36)
Ensure maximum safety before starting. First, disconnect the battery cables. Locate the fuel pump, which is in the fuel tank under the rear passenger…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
To replace the fuel pump on a BMW 3 Series E92, remove the rear seat to access the components underneath. This will allow you to detach the circular …
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |