Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Ultrasound Alarm Sensor

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Accessory kit

See other generations:
Video tutorial

The alarm system in BMW vehicles integrates an ultrasound sensor for cabin protection and acts as a true motion sensor: it emits ultrasound waves, and if something moving in the cabin interferes with the waves, it activates the alarm system. This sensor is located on the headliner and can be easily recognized as it is a component attached to the headliner itself; pry on the sides to release the pressure clips, disconnect the connector, and then detach the sensor, paying attention to the orientation: use the label as a reference.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) The red LED under the rearview mirror indicates the presence of the alarm system and provides information about its status based on its flashing patt…
BMW Serie 5 (1995-2003 / E39) One of the components of the onboard system is the oxygen sensor. If the sensor fails, the check engine light turns on and stays on until the sensor …
BMW Serie 5 (1995-2003 / E39) If you own a BMW (both Series 3 and Series 5, any version) and suddenly, after locking it with the remote, thus activating the factory alarm, it star…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos