Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front seat cover on the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Seat

In order to replace the front seat cover on the BMW 3 Series, you need to pry with an object so that you can detach the plastic covers located on the side parts of the seat itself: when these covers have been removed, it will be possible to pry with a screwdriver, so that the flaps of the seat cover can be detached from the corresponding frame. Then, the new coating can be inserted around the frame and the previously removed plastic covers can be reinserted; after replacement, the seat can be fixed again inside the passenger compartment.

Posted on 8 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the BMW 3 Series seat handle.
Disassembly of the BMW 3 Series seat handle.
BMW Serie 3 (1990-2001 / E36) Today's guide will show us the main steps necessary for disassembling and replacing the front seat handle of the BMW 3 Series. First, we open the dri…
How do you remove the rear seats of the BMW 3 Series?
How do you remove the rear seats of the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) In order to remove the rear seats of the BMW 3 Series, you need to lower the cover located in the middle of the two backrests; once this has been low…
Removing the front seat of a BMW 3 Series
Removing the front seat of a BMW 3 Series
BMW Serie 3 (2005-2013 / E90, E92, E91) Does the front seat of our BMW 3 Series need to be changed? Let's see how it disassembles. We unscrew the tightening screw located under the seat bel…

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos