Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Seat Handle of the BMW 3 Series

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Handle

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the front seat handle of the BMW 3 Series. First, open the driver's side front door and start removing the screws from the front seat tracks to lift the seat, as shown in the video.

At this point, disconnect the handle cable to remove it; pull out the cable to disassemble and replace the handle with the correct new one; then install the handle and the new cable, finally checking the operation of the front seat folding mechanism!


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of a BMW 3 Series
How to Remove the Rear Seats of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the rear seats of a BMW 3 Series. Remove the seat bottom (lift the seat by hand) until it completely detaches from the floor …
How to Remove the Rear Seats on a BMW 3 Series
BMW Serie 3 (1982-1992 / E30) Here’s how to remove the rear seats on a BMW 3 Series: First, remove the metal guides at both ends of the backrest (mounted on the vehicle's body) us…
Remove the Fuel Pump on BMW 3 Series
Remove the Fuel Pump on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the fuel pump from inside the tank of a BMW 3 Series. Remove the rear seat cushions and access the disassembly. Disconnect the battery cables,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos