Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Fuel Pump on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

Remove the fuel pump from inside the tank of a BMW 3 Series. Remove the rear seat cushions and access the disassembly.

Disconnect the battery cables, then use a socket wrench to remove the fastening screws of the metal cap, and take it out of its seat. Clean the covering surface with absorbent paper to avoid soiling the inside of the tank.

Disconnect the fuel supply connectors and the liquid circulation hoses. Remove the fuel pump from its seat along with the attached components.

Install the new fuel pump with electrical connectors, hoses, and fastening screws. Reinstall the seats after completing the installation.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump on a BMW 3 Series?
How to Remove the Fuel Pump on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) Remove the fuel pump on a BMW 3 Series? First, disconnect the battery cables. Then, remove the rear seat cushions using the appropriate removal tools…
Fuel Pump Replacement for BMW 3 Series
Fuel Pump Replacement for BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…
Guide to replacing the fuel pump of the BMW 3 Series 325i
Guide to replacing the fuel pump of the BMW 3 Series 325i
BMW Serie 3 (1998-2006 / E46) These brief and simple instructions will show us the main steps on how to disassemble and replace the fuel pump of the BMW 3 Series 325i. First, we o…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos