Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump relay located in the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Fuel pump

If the fuel pump in your BMW 3 Series suddenly stops working, the first thing to do is check the status of the respective relay, whose position is shown in this video. As demonstrated, it is located in the fuse box inside the cabin, specifically behind the passenger glove compartment. To access it, you will first need to remove the glove box. The relay in question is the first in the only row when looking at the fuse box from the front. Make sure to replace it with a part that has the same specifications to avoid damaging the pump.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the Fuse Boxes on a BMW 3 Series E46
Location of the Fuse Boxes on a BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see where the fuse boxes are located on the BMW E46 (produced from 1998 to 2006): The first fuse box is in the glove compartm…
Where is the fuel pump fuse located in the BMW 3 Series?
Where is the fuel pump fuse located in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you can see where the fuel pump fuse is located in the BMW 3 Series, an element to check if it suddenly stops working. As shown, the f…
Fuel Pump Replacement for BMW 3 Series
Fuel Pump Replacement for BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos